Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
M10 x 1.5 thread
Breather valve and filler plug for drive box and CARC units
Can be used in place of Guzzi ref. GU05206530, 2A000438 and 2A000823
See SIA10900 for related crush washer
This part is due back in stock soon, call 01484 841395 to reserve yours
19206501 GU19206501 19 20 65 01
1920 6501 1920.6501 19.20.65.01
£20.00
INC VAT
£16.67 EX VAT
Dimensions:
47mm OD
Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes
Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549
More than 5 in stock
90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48
£18.50
INC VAT
£15.42 EX VAT
Dimensions:
M20 x 1.5
M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins), also used for cylinder head bolt
See ACA12600 for aluminium alternative that can be undone by hand. Includes recess for O ring ENA90203
More than 5 in stock
12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00
£17.50
INC VAT
£14.58 EX VAT
1 litre of Millers 85w-140 mineral based final drive oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals
An extreme pressure drive box oil SAE 85w140 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.
Provides performance level specified by manufacturers for axles and final drives.
Low friction transmission oil reduces axle noise.No need to use separate moly additive with this oil.
170ml required for bevel box lubrication on all models except V9 which uses 210ml
Please note this part CANNOT be posted outside of the UK mainland area
2 in stock
£17.00
INC VAT
£14.17 EX VAT
Lock nut used as drive box pinion collar nut and clutch lock nut
This part is due back in stock soon, call 01484 841395 to reserve yours
19356700 GU19356700 19 35 67 00
1935 6700 1935.6700 19.35.67.00
£17.00
INC VAT
£14.17 EX VAT
Dimensions:
47mm OD
Drive box input seal
Pinion oil seal
More than 5 in stock
90403251-z 90403251 GU90403251 90 40 32 51
9040 3251 9040.3251 90.40.32.51
£16.60
INC VAT
£13.83 EX VAT
Dimensions:
95mm OD
Final drive inner output seal
For Breva 750 from frame no. LL111908
2 in stock
90407591-z 90407591 GU90407591 90 40 75 91
9040 7591 9040.7591 90.40.75.91
£15.80
INC VAT
£13.17 EX VAT
Dimensions:
M10 x 15mm
Magnetic gearbox and final drive level plug in zinc finish
Magnetic tip collects steel swarf. Also known as Guzzi ref. 31003766. Used as sump plug on 1100 Sport.
See SSA95214 for stainless steel version of this part (only available without magnetic tip).
1 in stock
95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£15.00
INC VAT
£12.50 EX VAT
Dimensions:
narrow end 50mm ID, wide end 65mm ID x 40mm long
Black rubber UJ boot / gaiter
See TRA23101 for clip
1 in stock
23548080-z 23548080 GU23548080 23 54 80 80
2354 8080 2354.8080 23.54.80.80
£14.00
INC VAT
£11.67 EX VAT
Dimensions:
20mm thread
Magnetic oil drain plug for engine sump or filler plug for drive box and gearbox
Can also be fitted to V7 Sport, 750S, 850 GT and other early big twins which originally had a plain drain plug. May be supplied in either black or silver finish.. See SSA12600 and ACA12600 for stainless or aluminium versions of this part
This part is due back in stock soon, call 01484 841395 to reserve yours
12003702 GU12003702 12 00 37 02
1200 3702 1200.3702 12.00.37.02
£12.70
INC VAT
£10.58 EX VAT
Secure online shopping 
